9
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 7 7. 87 7. 2269
CHAPTER 3: PRE-INSTALLATION
To change the fiber point of entry:
1. Loosen the grommet nut and remove the angled bracket.
2. Find the new entry point and remove the plug cap and re-install the angled bracket.
3. Be sure to secure the angled bracket and re-install the plug cap in the previous location.
NOTE: Make sure that you do steps 1 and 2 first. This will make your installation easier.
To Next Page
Loading...