Page 10
724-746-5500 | blackbox.com
Chapter 3: System Installation
2. Bend the antenna to 90 degrees or 45 degrees.
90°
45°
Figure 3-8. Bend antenna.
3. You may turn one antenna 45 degrees to the left and the other 45 degrees to
the right. The tilted antennas couple together much less than if they are both
pointed in the same direction.
NOTE: Align the polarization of the antennas properly. Maximum signal strength
between bridges occurs when both antennas are using identical
polarization.
4. Tighten the connector joint clockwise to fix the antennas.
Figure 3-9. Tighten the connector clockwise.
To Next Page