EasyManua.ls Logo

BLACK DECKER HGS100T - User Manual

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HGS100T, HGS100P, HGS100G, HGS100TC
COMPACT GARMENT STEAMER
VAPORIZADOR DE ROPA COMPACTO
DÉFROISSEUR À VAPEUR COMPACT
use and care manual
manual de uso y cuidado
guide d’utilisation et d’entretien

Questions and Answers

  • C
    Carl McintyreJul 28, 2025
    Why is my BLACK+DECKER Steam Cleaner not producing steam?
    • J
      Jacqueline LarsonJul 29, 2025
      If your BLACK+DECKER Steam Cleaner isn't producing enough steam, ensure it preheats for at least 60 seconds. Also, check that the water tank is filled to the Max level marker as described in the “filling the water tank” section. If the steamer hasn't been used recently, press the 'steam reset' button on the bottom to clear any air pockets in the pump.
  • T
    Tommy CaldwellAug 5, 2025
    What to do if my BLACK+DECKER Steam Cleaner is leaking?
    • M
      Michael WilliamsAug 5, 2025
      If your BLACK+DECKER Steam Cleaner is leaking or spitting, allow it to heat for about 45 seconds. Wipe the ironing plate with a soft, damp cloth to remove condensation. Ensure the water tank isn't running low by filling it to the Max level marker, following the instructions in the 'Filling the Water Tank' section.
  • D
    Dan SanchezAug 12, 2025
    What to do if BLACK+DECKER Steam Cleaner is plugged in but not heating?
    • R
      Rhonda GarciaAug 12, 2025
      If your BLACK+DECKER Steam Cleaner is plugged in but not heating, check that the plug is properly inserted into the outlet or try plugging the steamer into a different outlet. This will help resolve any power supply issues.
  • B
    Brittney JohnsonAug 18, 2025
    How to prevent discolored water from BLACK+DECKER Steam Cleaner staining fabric?
    • A
      angelalewisAug 19, 2025
      If discolored water stains fabric while using your BLACK+DECKER Steam Cleaner, it might be due to residue in the water tank or on the ironing plate. Empty the water tank after each use and only use distilled, filtered, or purified water. Avoid perfumed or scented additives and regularly clean the steamer. If you use starch, always clean the steamer ironing plate afterward.

Summary

Important Safety Instructions

Getting to Know Your Steamer

Steamer Components

Identification of key parts like the ironing plate, trigger, and tank.

How to Use Your Steamer

Getting Started

Initial setup steps including removing labels and reading instructions.

Important Notes

Key considerations for water type, fabric care, and operational behavior.

Filling the Water Tank

Step-by-step guide for safely filling the water reservoir.

Using the Handheld Steamer

Instructions on operating the steamer for garments, including steam generation.

Cleaning and Care

Cleaning Steamer Exterior

Procedures for cleaning the external parts and ironing plate.

Storing the Steamer

Proper methods for storing the steamer upright and empty.

Steaming Tips and Tricks

Troubleshooting

BLACK DECKER HGS100T Specifications

General IconGeneral
Power1500 Watts
Water Tank Capacity350 ml
Heating Time30 seconds
Weight2.8 lbs
Cord Length16 ft
Wattage1500 Watts
Heat Up Time30 seconds
AccessoriesSqueegee

Related product manuals