What to do if my BLACK DECKER Steam Cleaner is not producing steam?
If your BLACK DECKER Steam Cleaner isn't producing steam, first, ensure the water tank is full and correctly fitted. Note that when first filled or after running dry, it can take up to 45 seconds for steam to be produced. Also, check that the steam generation button is in the ON position.
How to fix BLACK DECKER Steam Cleaner that is not turning on?
If your BLACK DECKER Steam Cleaner isn't turning on, ensure it is properly plugged into the wall. Also, check that the unit is switched on. Finally, check the fuse.
Why is my BLACK DECKER Steam Cleaner producing too much steam?
If your BLACK DECKER Steam Cleaner is producing too much steam, vary the thumbwheel control dial to reduce the amount of steam being produced. The steam mop has 3 settings.
What to do if my BLACK DECKER Steam Cleaner is producing too little steam?
If your BLACK DECKER Steam Cleaner is producing too little steam, vary the thumbwheel control dial to increase the amount of steam being produced. The steam mop has 3 settings.
Guidelines for safe use by children and others, and cord safety.
On/Off switch, steam operate button, and variable steam control.
Includes water tank, handle, and steam head.
Steps to connect the handle and insert the water tank.
Instructions for attaching the cleaning pad to the steam head.
Steps to detach the cleaning pad after use.
How to operate the power and steam buttons.
Adjusting steam levels for different floor types.
Basic operational advice for best results.
General| Power | 1600 W |
|---|---|
| Cord Length | 5 m |
| Steam Pressure | 3.5 bar |
| Product Type | Steam Mop |
| Accessories | Microfiber pad |
To Next Page
