To Next PageTo Next PageWhy Black Diamond Equipment BD2923 has low pressure?
If your Black Diamond Equipment Pressure Washer has low or no water spray pressure, the water supply might be insufficient. Ensure the water supply pressure is at least 5 gpm @ 20 PSI. Also, the high-pressure hose should be less than 100 feet long. Make sure that the water inlet screen and the nozzle are not clogged. Clean them, if needed.
General| Brand | Black Diamond Equipment |
|---|---|
| Model | BD2923 |
| Category | Pressure Washer |
| Language | English |
Contains important safety information and instructions. Read before operation.
Read additional instructions provided with product, equipment, and accessories.
Understand safety symbols and definitions for hazard levels: DANGER, WARNING, CAUTION, NOTICE.
Warning regarding chemicals known to cause cancer, birth defects, or reproductive harm.
Warning about potential carcinogens in air filter element and air box assembly.
Instructions for attaching the knob-style handle to the pressure washer frame.
Instructions for attaching the button-style handle to the pressure washer frame.
Steps for threading the lance into the spray gun assembly.
Guidance on placing spray gun, nozzles, and high-pressure hose on the unit.
Guide to selecting the correct nozzle based on spray pattern, uses, and surfaces.
Procedure for inserting a nozzle into the spray wand's quick-connect coupler.
Guidance on placing the pressure washer in a safe, well-ventilated outdoor area.
Notes on engine performance and carburetor adjustment for altitudes above 5000 feet.
Pre-use checks for parts, leaks, and general condition; safety during operation.
Procedure for checking the engine oil level, including hot oil caution.
Important information on safe refueling, gasoline types, and fuel tank pressure.
Definitions of key terms like PSI, GPM, and CU for pressure washer operation.
Pre-operation checks and safety measures including area preparation and plant protection.
Techniques for effective and safe pressure washing, including nozzle angle and stroke patterns.
Procedure for cleaning the unit's exterior, vents, and cooling slots with an air compressor.
Recommendations for cleaning and lubricating hose, spray gun, and pump connections.
Steps to clear obstructions from nozzles and rinse them for optimal performance.
Instructions for checking and cleaning the water inlet filter before each use.
Information on the pump's maintenance-free design and where to seek service.
Guidance on pre-use engine checks and recommendations for professional service.
Steps for preparing the unit for short-term storage, including fuel stabilization.
Procedure for long-term storage, including fuel draining, oil change, and cylinder lubrication.
Safety precautions and methods for transporting the pressure washer securely.
