To Next PageTo Next PageWhy Black Diamond Equipment BD3325 has low pressure?
If your Black Diamond Equipment Pressure Washer has low or no water spray pressure, the water supply might be insufficient. Ensure the water supply pressure is at least 5 gpm @ 20 PSI. Also, the high-pressure hose should be less than 100 feet long. Make sure that the water inlet screen and the nozzle are not clogged. Clean them, if needed.
General| Brand | Black Diamond Equipment |
|---|---|
| Model | BD3325 |
| Category | Pressure Washer |
| Language | English |
Emphasizes reading and understanding all safety, operation, and maintenance instructions before use.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Warns about slip and trip hazards in public areas, requiring signage and barriers.
Lists essential PPE like hearing protection, safety glasses, long pants, and closed-toe shoes for safe operation.
Details the necessary water supply specifications (GPM, PSI) for connecting hoses.
Step-by-step instructions for connecting the water supply and high-pressure hoses to the washer and spray gun.
Explains the importance of purging air and the steps to do so before starting the engine to prevent pump damage.
Warns about severe risks of fluid injection injuries from high-pressure spray and how to avoid them.
Provides a table and guide for selecting the correct nozzle based on color, spray pattern, use, and surface.
Specifies operating the pressure washer on a level, well-ventilated outdoor surface, away from flammable materials and structures.
Alerts to carbon monoxide danger from engine exhaust, requiring outdoor operation and ventilation.
States engine is shipped without oil and must be filled before starting to avoid damage and voiding warranty.
Step-by-step guide on checking and filling engine oil to the correct level.
Warns about gasoline flammability and explosiveness, providing safe refueling practices.
Warns about running the pump without the spray gun trigger pulled, leading to overheating and damage.
Step-by-step guide for starting the engine, including switch, fuel valve, throttle, and choke settings.
Warns that shutting off water supply before the engine can damage the pump, which is not covered by warranty.
Step-by-step instructions for safely shutting down the engine, including trigger lock and water supply.
Lists common causes for the engine not starting and their solutions, referencing the engine manual.
Identifies causes for low or no water pressure, such as air in the pump or clogged nozzles, and provides solutions.
Step-by-step guide on draining and refilling the pump oil using the correct type and level.
