Do you have a question about the Black Max BM3716 and is the answer not in the manual?
Read manual, learn applications, limitations, and potential hazards.
Understand kickback causes and how to reduce risk to prevent injury.
Maintain a firm grip with both hands and use a stiff left arm for control.
Do not overreach or cut above chest height.
Keep body parts away from hot muffler to avoid serious burns.
Always hold the chain saw with both hands, using a firm grip.
Wear snug-fitting clothing, boots, gloves, secure hair. Avoid loose items.
Kickback is dangerous; take special precautions to avoid injury.
Explains DANGER, WARNING, CAUTION, NOTICE signal words and their meanings.
Reduce injury risk by reading and understanding manual.
Keep tool away from electrical lines; keep bystanders away.
Engines produce deadly carbon monoxide; do not operate in enclosed areas.
Backward/upward motion of guide bar from chain contact.
Process of cutting down a tree.
Bent log/branch that springs back when cut.
Lists bar length, chain pitch, gauge, type, drive links, sprocket, displacement, etc.
Prevents chain contact with wood at guide bar end.
Stops chain rotation; does not prevent kickback.
Carefully remove tool and accessories, check packing list.
Do not use if not fully assembled or if parts are missing/damaged.
Never cut near power lines; do not touch live lines.
Handle fuel with care; check for leaks; refuel outdoors.
Check condition before each use; engage/reset brake.
Steps for starting a cold engine: brake, choke, primer, pull rope.
Shut off engine, disconnect spark plug wire before servicing.
Inspect for damaged, missing, loose parts; tighten fasteners.
Critical for performance; check before use and periodically.
File all cutters to specified angles and length for uniform cutting.
Possible causes: no spark, engine flooded. Solutions involve checking spark plug.
Possible causes: carburetor adjustment, air leak. Solutions: adjust idle speed screw.
Causes: empty oil tank, tight chain, non-functioning oiler. Solutions: fill oil, adjust tension.
Causes: brake engaged, tight chain, incorrect assembly. Solutions: release brake, adjust tension.
Contact service dealer for parts/service; visit website for assistance.
Record item, manufacturing, and serial numbers found on housing label.