To Next PageTo Next PageWhat to do if AC receptacle does not work on Black Max Portable Generator?
If the AC receptacle on your Black Max Portable Generator isn't working, check these possible causes: * The circuit breaker may be tripped: Reset the AC circuit breaker. * The GFCI may be tripped: Reset the GFCI. * The item plugged in may be defective: Try a different item.
Why does my Black Max BM907500 engine lack power?
If your Black Max Portable Generator engine lacks power, consider these possible causes: * The air filter may be dirty: Check the air filter element and clean or replace it as needed. * The engine may have been stored without treating or draining gasoline, or refueled with bad gasoline: Drain the fuel and carburetor. Refuel with fresh gasoline. If the problem continues, contact a qualified service center.
What to do if my Black Max Portable Generator engine is hard to start?
If your Black Max Portable Generator engine is hard to start: * There may be water in the gasoline: Drain the entire system and refill with fresh fuel. * There might be a weak spark at the spark plug: Replace the spark plug or contact a qualified service center.
Why is my Black Max Portable Generator making a knocking noise?
If your Black Max Portable Generator is making a “spark knock” or “pinging” noise: * An occasional light knocking or pinging under heavy load is not a cause for concern. Switch to a different brand of gasoline, making sure that the octane rating is 86 or higher. * If the knocking or pinging occurs under normal load at a steady engine speed, the problem may be with the brand of gasoline being used. If the problem continues, contact a qualified service center.
General| Brand | Black Max |
|---|---|
| Model | BM907500 |
| Category | Portable Generator |
| Language | English |
Provides essential phone numbers for customer support and service inquiries.
Details risks of CO poisoning and necessary precautions for safe generator use.
Covers critical safety rules for operating the generator, including electrical connections.
Addresses hazards associated with fueling, hot components, and burn prevention.
Emphasizes proper grounding and electrical safety measures during use.
Covers operating clearances, avoiding hazardous materials, and environmental considerations.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signal words.
Details the meaning of various symbols found on the generator for safe operation.
Describes essential safety labels related to electrical hazards and general warnings on the unit.
Provides guidance on selecting appropriate extension cord sizes based on load and length.
Estimates the required starting watts for various electric motors.
Explains GFCI protection for receptacles and outlines testing procedures.
Steps to determine total running and starting watts needed for connected appliances.
Recommendations for sequentially adding loads to protect the generator and devices.
Details engine type, fuel volume, rated voltage, amps, output, and frequency.
Familiarizes users with product features, controls, and general operation aspects.
Details receptacles, ground terminal, and protective electrical components.
Covers fuel tank, fuel valve, and oil components for fluid management.
Instructions for unpacking and checking all included parts against the list.
Lists needed tools and guides for installing the generator's feet onto the frame.
Steps for attaching the wheels to assist in moving the generator.
Instructions for connecting and disconnecting the generator's battery safely.
Reinforces CO safety and handle operation guidelines for safe use.
Covers checking lubricant levels and using fuel stabilizer before operation.
Details ethanol fuel restrictions and methods for starting the engine.
Covers exterior cleaning, air vents, and air filter maintenance for optimal performance.
Details oil changes, spark plug care, exhaust cleaning, and fuel draining procedures.
Covers fuse replacement, battery handling, filter replacement, and transport preparation.
Guidelines for generator storage and the overall maintenance schedule.
Diagnoses and solutions for engines that won't start or are hard to start.
Addresses problems with engine power loss and non-functional AC receptacles.
Explains potential causes for knocking or pinging noises during operation.
Outlines the terms, duration, and conditions of the limited product warranty.
Specifies receipt requirement for service and lists warranty exclusions.
Provides instructions on how to contact the company for warranty claims and support.
Directs users to contact dealers or online resources for parts and service assistance.
Explains where to find item, manufacturing, and serial numbers for parts ordering.
