EasyManua.ls Logo

Black Stone 1856 - Steps 2 & 3: Tray, Tank Hangers & Body Placement

Black Stone 1856
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
! CAUTION
Two people are recommended for
the assembly of this product.
! WARNING
The manufacturer has made every
eort to eliminate any sharp
edges. However, you should
handle all components with care
to avoid accidental injury.
Some parts may contain sharp
edges, especially as noted
in these instructions. Wear
protective gloves if necessary.
! WARNING
The use of alcohol, prescription
or non-prescription drugs may
impair the consumer’s ability
to properly assemble or safely
operate the appliance.
STEP 02
Place the tray between the griddle legs. Attach the bottom tray on the right
with one (1) large thumbscrew. Attach the lower propane tank hanger and
the le side of the bottom tray with one (1) small thumbscrew.
STEP 03
With the help of another person, pick up the griddle body and set it on its
wheels. Attach the upper tank hanger with the one (1) shear pin and one (1)
cotter pin.
28” Griddle Cooking Station | Parts & Assembly
03