STEP 04
Install the control knobs by pushing them into place.
STEP 05
Pre-lock two (2) M6 bolts into the upper holes. The sideshelf will then slide
onto them. Once the sideshelf is in place, use two (2) M6 Bolts in the bottom
set of holes to attach the sideshelf securely. Tighten the screws.
STEP 06
Add handle to the right side of the griddle body by inserting four (4) M6 Bolts
from the outside of the body and then secure them with four (4) M6 Nuts
from the inside of the body. Use a screw driver and a wrench to tighten.
28” Griddle Cooking Station | Parts & Assembly
04
To Next Page
