Black Stone 2149 - Page 8

ENGLISH
BLACKSTONEPRODUCTS.COM/SUPPORT
OWNER’S MANUAL | ASSEMBLY GUIDE
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place.
Place the two front pins into the
front locking holes and push the
griddle top and hood back. Then,
set the two rear pins into the
rear holes.
Place the two front pins into the
front locking holes and push the
griddle top and hood back. Then,
set the two rear pins into the
rear holes.
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place.
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place.
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place.
MODEL: 
STEP 13
Use four (4) M4x10 screws to attach the two (2) hard cover
handles and two (2) hard cover hooks to the hard cover.
(Hang hard cover on back of griddle top when in use, and place hard
cover on the griddle top when not in use.)
STEP 10
❶ ❶
Slide the right side shelf onto the side shelf brackets.
(The threaded M6 step bolts will hook and hold the shelf.)
❷ ❷
Use two (2) M6 step bolts to secure the right side shelf to the side
shelf brackets.
Repeat with the left side shelf.
STEP 11
Hang the grease cup in the slot on the back of the
griddle body.
STEP 12
With the help of another person, place the griddle top onto
the griddle body by aligning the four foot pins to the holes on top of
the unit.
❶
❶
❷
❷
