BLACKSTONEPRODUCTS.COM/SUPPORT
ENGLISH
| OWNER’S MANUALASSEMBLY GUIDEMODEL:
STEP 03
With the help of another person, set the griddle on its feet.
Use one (1) shear pin [h.] and one (1) cotter pin [i.] to attach the LPG
hook to the upper bar of the left leg assembly.
STEP 04
Use two (2) M6x12 bolts [a.] to attach the paper towel holder
to the front right leg.
STEP 05
Unscrew the two (2) lower bolts from the sides of the
griddle body.
Use these two bolts and two (2) M6x12 bolts [a.] to attach the logo
panel to the front of the griddle.
STEP 06
Install the four (4) control knobs by pushing them into place
in the OFF position.
[a.]
[a.]
To Next Page