BLACKSTONEPRODUCTS.COM/SUPPORT
ENGLISH
| OWNER’S MANUALASSEMBLY GUIDEMODEL:
STEP 03
Use one (1) medium thumb screw [a.] to attach the LPG
support and the stabilizing shelf to the left leg assembly.
STEP 04
With the help of another person, set the griddle on its feet.
Install the four (4) control knobs [e.] by pushing them into place in
the OFF position.
Use one (1) shear pin [g.] and one (1) cotter pin [f.] to attach the LPG
hook to the upper bar of the left leg assembly.
STEP 05
Use four (4) M6x12 bolts [d.] to attach the side handle to the
left side of the griddle body.
STEP 06
Use one (1) M6x12 bolt [d.] and two (2) washers [i.] to attach
the paper towel holder to the front right leg.
To Next Page
Loading...
