BLACKSTONEPRODUCTS.COM/SUPPORT
ENGLISH
| OWNER’S MANUALASSEMBLY GUIDEMODEL:
STEP 16
With the help of another person, set the oven body on the
cart. Use four (4) M6x14 screws [a.] to secure.
STEP 18
Set one (1) pizza stone on the cast iron turntable. Place one
(1) pizza stone on the upper pizza chamber.
STEP 19
Set the oven lid on the oven body.
STEP 17
Use two (2) M6x14 countersunk screws [b.] to attach the
turntable to the rotating shaft.
[a.] × 4
To Next Page
