1.8. Changing the blades of the rotor or the counter blade and checking blade bolts
should only be done when the engine and rotor are stopped, the spark plug cap is
removed and the rotor is blocked.
1.9. After one hour of use always check that all bolts and nuts are still tightened
properly. If not, tighten them again or bring the machine back to your
dealer/service-point.
1.10. Use only original parts for maintaining your shredder, otherwise the warranty
will be void.
1.11. The shredder can only be repaired by a skilled dealer/service-point.
1.12. The shredder exceeds 90 dBA during operation. Therefore all users and
onlookers must wear ear-protection.
1.13. Before use, make secure that the bolts on the fixed blade are firmly fixed.
Check after one hour that the bolts still are firmly fixed (just first time).
To Next Page
Loading...