Need help?Do you have a question about the Black Tools GTS-1500-E and is the answer not in the manual?
General| Brand | Black Tools |
|---|---|
| Model | GTS-1500-E |
| Category | Other |
| Language | English |
Defines the shredder's primary purpose for shredding branches up to 8.5 cm diameter.
Lists materials not to be shredded and pre-use checks for roots (diameter < 8.5 cm).
Explains the shredder's components, rotor, blades, engine, and automatic feeding mechanism without a feeder belt.
Attaching wheels and axle to the base using specific bolts, washers, and gaskets.
Securing inlet and outlet hopper assemblies to the roller cover plate using bolts and washers.
Attaching the connecting shaft, tow bar, and securing hitch pins with R pins.
Instructions related to pulling out the lock pin and turning the handle during operation.
Details on setting the correct blade gap (approx. 2 mm) and ensuring all screw joints are secure.
Instructions on ensuring belt/pulley alignment and connecting the battery's positive cable to the starter.
Guidance on filling fuel/oil and the initial engine starting steps including choke and petrol tap.
Outlines user age, machine placement, required PPE, ventilation, and single-operator rule.
Procedures for blade changes, bolt checks, using original parts, and checking blade security.
Ensures machine stability, respects danger zones, and details engine starting and branch feeding.
Covers engine shut-off for maintenance, cleaning, lubrication, and regular screw joint checks.
To Next Page