Black Tools GTS-1500-E - Step 3: Tow Bar and Hitch Pin Attachment

To Next Page

To Previous Page

STEP 3.

1. Attach the connecting shaft (#86) to the base (#22) using hex bolt M10x50

(#87), flat washer Ø10 (#49) and nylon lock nut M10 (50).

2. Lock handle (#28) and base (#22) using hex bolt M10x45 (#85), flat washer

Ø10 (#49) and nylon lock nut M10 (50). Then insert lock pin (#26) to the rear

hole.

3. Attach the tow bar (#20) to the square tube of base (#22), then secure hitch

pin (#63) using R pin (#64), the other side secure hitch pin(#33) using R pin

(#64).