Black Widow Security BW IM 1 User Manual

1
Standard Features
The system has the following standard features:
• (2) 1-button remote controls
• Two Built-in relays for starter and/or fuel system
disable
• LED indicator
• Valet switch
• Passive or active arming
• Ignition trigger
Optional Features
The system has many optional features that may require
additional parts and/or labor.
• Remote keyless entry (Door lock/unlock)
• Optional third circuit defeat output
• Illuminated entry
• Horn honk
• Anti-carjacking
• Selectable parking light/horn output
Adding or Deleting Remote Controls
Follow the steps below to code a replacement trans-
mitter into the system (maximum of 4). If there are
less than 4 transmitters, code the last transmitter
multiple times to fill all 4 transmitter slots and force
any lost or stolen transmitters out of the system.
To enter Code Learning Mode:
1. Turn ignition key on, off, on, off, and leave on
within 5 seconds.
• The LED will will flash 3 times.
2. Press and hold the valet switch for 2 seconds.
• The LED will will flash 5 times.
3. Release the valet switch.
4. Program all desired remotes by pressing the
button on each of the transmitters.
• The LED will will flash after the system has
learned each transmitter.
5. Turn off the ignition.
Passive Vehicle Immobilizer System
Owner / Installation Manual
Wiring Diagram

Black Widow Security BW IM 1 Specifications

General

Type	Car Alarm
Two-Way Paging	Yes
Remote Start	Yes
Shock Sensor	Yes
Keyless Entry	Yes
Engine Immobilizer	Yes
LCD Remote	Yes
Panic Mode	Yes
Voltage	12V
Compatibility	Universal

Summary

System Features

Standard Features

Lists basic system capabilities like remote controls, relays, LED, valet switch, and arming modes.

Optional Features

Details additional system capabilities requiring extra parts or labor, including keyless entry and illuminated entry.

Remote Control Programming

Adding or Deleting Remote Controls

Provides step-by-step instructions for coding replacement transmitters into the system, up to a maximum of four.

Wiring Diagram and Connections

Wiring Diagram

Illustrates the system's wiring connections, including antenna, door lock outputs, LED, and override switch.

Pin Connections

Details the function and connection requirements for each pin in the system's connectors.

System Operation Modes

Arming Operation

Explains how to manually arm the system using the transmitter button, including confirmation chirps and LED status.

Passive Arming

Describes the automatic arming feature that activates after the ignition is turned off and the transmitter is away.

Disarming Operation

Details how to disarm the system manually via the transmitter button, including confirmation chirps and door unlock.

Advanced System Functions

Auto Transmit Mode

Enables hands-free operation where passive arming occurs automatically when the transmitter is out of range.

Valet Mode

Disables Passive Arming and Auto Transmit functions, allowing the system to be armed manually.

Emergency Override

Procedure to disarm the system when the transmitter is lost or fails to operate, by using the valet switch.

Anti-Carjacking Feature

Activates audible and circuit-disable warnings if the transmitter is moved out of range while the ignition is on.

Programmable Features

Remote Programmable Features

Lists and describes various features that can be customized via the transmitter and valet switch.

Default Reset

Instructions to reset all programmable features back to their original factory default settings.