EasyManua.ls Logo

Black Widow Security BW2900R2 User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Standard Features:
Two 4-Button Remote Transmitters
Status indicator (LED)
Valet / override switch
Multi-tone siren (120dB)
Dual stage impact detector
Remote panic
Remote chirp mute
Remote sensor bypass
Active or passive arming
Optional Features:
Starter disable
Flashing parking lights
Keyless entry
Remote trunk or hatch release
Illuminated entry
Hood and trunk protection
Remote auto start
Power window roll up
Back-up battery w/charging circuit
Glass break sensor
Note: Some features may require additional
parts and labor, and may not be appropriate for
certain vehicles. Consult your authorized dealer.
System Operation
ARMING OPERATION
To arm the system press transmitter button 1:
The siren will chirp once.
The parking lights will flash once.*
The doors will lock.*
The LED will turn solid for 10 seconds
then start flashing slowly. After 10
seconds the system is armed.
After Arming, if the system detects a bad
sensor or an open zone, the siren will chirp
and the parking lights will flash 4 times to
indicate a zone is open. The system will
ignore that input, but keep all other areas
protected.
While Armed, the system will trigger if:
The doors are opened.
The shock sensor detects an impact to
the vehicle.
The hood or trunk is opened.
When triggered, the siren will sound, the
horn will honk*, and the parking lights will
flash* for 30 seconds.
If the same input triggers the system 3 times
during a single arming cycle, the system will
bypass that input, keeping the other zones
protected, until the next time the system is
armed.
If the shock sensor detects a light impact to
the vehicle, the siren will chirp and the
parking lights will flash 5 times to warn away
the potential intruder.
*
Optional Feature
2R / 4-BUTTON SERIES
VEHICLE SECURITY SYSTEM
Button
2
Button
3
Button
1
Button
4
Question and Answer IconNeed help?

Do you have a question about the Black Widow Security BW2900R2 and is the answer not in the manual?

Black Widow Security BW2900R2 Specifications

General IconGeneral
BrandBlack Widow Security
ModelBW2900R2
CategoryCar Alarm
LanguageEnglish

Summary

System Operation

ARMING OPERATION

Describes how to arm the system, including siren chirps and light flashes.

PASSIVE ARMING

DISARMING OPERATION

AUTO REARM

SILENT ARMING/DISARMING

IGNITION LOCK

REMOTE PANIC

TAMPER ALERT

EMERGENCY OVERRIDE

Installation Instructions

Before you begin the installation

Pre-installation checks, advice, and multi-meter usage.

Mounting The System Module

Guidance on module placement under the dash.

Mounting The Siren

Instructions for installing the siren under the hood.

Mounting The Shock Sensor

Guidance on shock sensor placement and adjustment.

12-Pin Main Harness

Details wiring connections for the main 12-pin harness.

Starter Defeat Connectors

Wiring instructions for the starter disable feature.

Plug in Connectors

Describes various connector ports for modules and switches.

Entering Programming

Describes the steps to enter system programming mode.

Complete Default Reset

Programmable Features

Test System and Adjust Shock Sensor

Adding Transmitters

DOOR LOCK WIRING DIAGRAMS

ADDING ACTUATORS

REVERSE POLARITY

RELAY WIRING DIAGRAMS

WIRING DIAGRAM - DIAGRAMA DE INSTALACION

PARKING LIGHT JUMPER - JUMPER DE LUCES

Related product manuals