Black Widow Security BW2900R2 - IGNITION LOCK; REMOTE PANIC; TAMPER ALERT; EMERGENCY OVERRIDE

3
EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by
using the emergency override feature.
To override the system:
1. Enter the vehicle.
• The alarm will trigger.
2. Turn on the ignition key.
3. Press the Valet switch for 3 seconds.
• The siren will stop sounding.
• The starter defeat will be bypassed.
• The system will enter valet mode.
VALET MODE
When the system is placed into the Valet
Mode the security system will be disabled.
However, the optional keyless entry and
trunk release features will still function if
installed. The valet feature may be accessed
using the valet switch or using the remote
transmitter.
To enter or exit valet mode using the switch:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet switch for 3
seconds.
• The siren will chirp once to enter
valet or twice for exit.
• The LED will turn on solid indicating
the system is in valet mode, or turn
off indicating valet mode exit.
To enter or exit valet mode using the
remote:
1. Be sure the ignition key is off.
2. Press transmitter button 2 then button
1 and hold for 3 seconds.
• The siren will chirp once to enter
valet or twice for exit.
• The LED will turn on solid indicating
the system is in Valet Mode, or turn
off indicating Valet Mode exit.
OPTIONAL TRUNK RELEASE
Press button 3 for approximately 2 seconds
to open the trunk.
O
PTIONAL TRUNK DISARM
The trunk disarm feature allows the alarm to
disarm automatically whenever transmitter
button 3 is used to activate the optional
trunk release. This eliminates having to first
disarm the alarm before activating the trunk
release. This feature must be programmed
during installation.
REMOTE SENSOR BYPASS
To arm the system and bypass the shock
sensor, press button 1 to arm, then within 2
seconds press button 4. The siren will chirp
once and sensors will be ignored until the
system is disarmed and rearmed.
STATUS INDICATOR (LED)
FUNCTION
S
On Solid = Valet Mode
On Solid and not in valet = Open Zone
Slow Flash = System Armed
Rapid Flash when disarmed = Passive
Arming
Rapid Flash when armed = Tamper Alert
PARKING LIGHT INDICATIONS
1 Flash = System Armed
2 Flashes = System Disarmed
3 Flashes = Tamper Alert
4 Flashes = Open Zone Indication (after
arming)
5 Flashes = Shock Sensor Warn-away