Need help?Do you have a question about the Blackmagicdesign Smart Videohub 20x20 and is the answer not in the manual?
General| Video Input | 20 x SDI |
|---|---|
| Video Output | 20 x SDI |
| Serial Router Control | RS-422 |
| Multi view output | No |
| Video Routing | 20x20 |
| Video Connections | SDI |
| SDI Rates | 270Mb, 1.5G, 3G |
| Video Standards | NTSC, PAL, 720p, 1080i, 1080p |
| Audio Input | Embedded in SDI |
| Audio Output | Embedded in SDI |
| Reference Input | 1 x BNC |
| Router Control | Ethernet |
| Software control | Yes |
| Firmware Upgrade | Yes |
| Power Supply | Internal |
| Operating Voltage | 100 - 240V AC |
| Operating Temperature | 0° to 40° C |
| Storage Temperature | -20° to 60°C |
| Relative Humidity | 90% non-condensing |
Steps for installing software on computers and iPads for control.
Instructions for installing crosspoint cards, power supplies, and interface cards.
Using the control panel and LCD for routing changes on Smart Videohub models.
Using the software for managing output, monitoring, and deck control connections.
Locking and unlocking routes, and managing connections via software.
To Next Page
