Need help?Do you have a question about the Blackmagicdesign Micro Videohub and is the answer not in the manual?
General| Model | Micro Videohub |
|---|---|
| Video Connections | SDI |
| Audio Input | Embedded in SDI |
| Audio Output | Embedded in SDI |
| Reference Input | 1x BNC |
| Router Control | Ethernet |
| Serial Router Control | RS-422 |
| Updates | Firmware upgradable |
| Power Supply | Internal |
| Ethernet | 1x RJ-45 |
| SDI Output Connectors | 16 x 12G-SDI. |
| Control Port | RS-422 |
| Operating Temperature | 0°C to 40°C |
| Relative Humidity | 90% non-condensing |
| SDI Rates | 3G |
| Storage Temperature | -20° to 60° C (-4° to 140° F) |
Compares Videohub models by capabilities to help users select the appropriate router.
Details connecting Videohub to a computer via USB or directly via Ethernet to a network.
Guides on installing the Videohub control software on Mac/Windows, iPad, and controller updates.
Details configuring Videohub server settings, network interfaces, and Smart Videohub IP.
Covers USB/Ethernet connections, button diagnostics, and software installation/updates.
Details controller setup, modes, macros, button labels, and GPI/Tally configuration.
Introduces the Universal Videohub 288, its features, components like cards, and power requirements.
Guides on building, installing crosspoint cards, and managing power supplies for the UVH 288.
Introduces the Universal Videohub 72, its features, components like cards, and power requirements.
Guides on building, installing crosspoint cards, interface cards, and managing power for the UVH 72.
Introduces the Smart Videohub 20x20, its control panel, LCD, and connectivity options.
Introduces the Smart Videohub 12x12, its control panel, LCD, and connectivity options.
Explains how to establish video and RS-422 control routes using the software interface.
Explains how to set up pushbuttons, assign icons, and manage connections in Pushbutton views.
Details methods for selecting sources and destinations using buttons, scroll wheel, and numbers on Master Control.
Covers configuring Smart Control as Cut-Bus or XY controller and changing routes.
To Next Page
