Need help?Do you have a question about the Blackmagicdesign Ultimatte 12 4K and is the answer not in the manual?
General| Model | Ultimatte 12 4K |
|---|---|
| Manufacturer | Blackmagic Design |
| Category | Recording Equipment |
| Resolution | 4K |
| Keying | Yes |
| Chroma Keying | Yes |
| Luma Keying | Yes |
| Control | Ethernet, USB |
| Ethernet | Yes |
| Computer Interface | USB |
| Supported Video Standards | 1080p, 4K |
Instructions for connecting the IEC power cable to the Ultimatte's rear panel.
How to connect the camera to the camera foreground input after power is connected.
Steps to connect the background source into the 'background' input.
Explains how Ultimatte automatically builds a composite once sources are connected.
How to reset the starting composite using the 'auto key' function on the front panel.
Connecting a standard IEC cable to the rear panel for power.
Connecting to a computer, network, or Smart Remote 4 via Ethernet.
Connecting the primary image to be used as the background for the composite.
Connecting the foreground image, typically talent in front of a green screen.
Lists video formats supported across different connection types.
Explains the information displayed on the LCD screen.
Using the front panel USB port to connect to a computer.
Navigating the setup menu for various settings.
Setting the default video standard that determines format for inputs/outputs.
Configuring IP address, subnet mask, and gateway settings.
Enabling DHCP for automatic IP address assignment on a network.
Steps to download and install the latest internal software.
Detailed explanation of the software for full control and configuration.
Information on installing Ultimatte Software Control and Setup applications.
Steps for installing Ultimatte software on macOS.
How to connect the computer via Ethernet for control.
Connecting Ultimatte to a network for control.
Assigning unit numbers for controlling multiple Ultimatte units.
Description of the main menu buttons for selecting input sources and configuration.
Section for saving presets, auto composite, and configuration settings.
Section for specific settings that can be selected, enabled, or disabled.
Displays status of Ultimatte units being controlled.
Selecting images to display on a video monitor connected to the monitor output.
Adjusting settings using control knobs on the interface.
Step-by-step guide to import images into the media pool.
Steps to assign imported images to background, layer, or matte.
Options for using RGB and alpha channels of stills for backgrounds/layers.
Saving workflow settings to quick presets via Ultimatte Software Control.
How to set the backing color (green, red, or blue) for matte generation.
Step-by-step guide to capture and apply screen correction.
Refining internal mattes using black gloss settings.
Using clean up settings to remove screen imperfections.
Refining spill suppression to restore foreground colors.
Adding subtle color influences from the background to the foreground.
Detailed adjustments for matte controls like density and black gloss.
Strengthening matte opacity and preventing background show-through.
Removing gray areas in the matte caused by highlights reflecting backing color.
Details on the four types of matte inputs accepted by Ultimatte.
Accessing preset management functions: saving, loading, exporting.
Steps to create a complete backup archive of the Ultimatte unit.
Changing the IP address using front panel LCD or Setup software.
To Next Page
