Need help?Do you have a question about the Blackmagicdesign HyperDeck Studio and is the answer not in the manual?
General| Built in Control Panel | Yes |
|---|---|
| Bit Depth | 10-bit |
| Video Connections | HDMI |
| Audio Connections | Embedded in SDI/HDMI, XLR |
| Control | RS-422, Ethernet |
| Power Supply | Internal |
| SDI Rates | 3G |
| Computer Interface | Ethernet |
| SD Video Standards | NTSC, PAL |
| HD Video Standards | 720p50, 720p59.94, 720p60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60 1080i50, 1080i59.94, 1080i60 |
| SDI Compliance | SMPTE 259M, 292M, 424M |
| HDMI Compliance | HDMI 1.4 |
| Recorder Media | SSD, HDD |
| External Control | RS-422, Ethernet |
| Recorder Control | RS-422, Ethernet |
| Storage | SSD, HDD |
| Frame Rates | 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60 |
| Chroma Subsampling | 4:2:2 |
| Timecode | Yes |
Overview of the three HyperDeck disk recorder models: Shuttle, Studio, and Studio Pro.
Connecting SDI or HDMI sources to HyperDeck models for recording.
Connecting monitoring or additional recording units to HyperDeck outputs.
Steps to record video using the HyperDeck Shuttle, including SSD insertion and button presses.
Instructions for playing back video clips using the HyperDeck Shuttle and Studio models.
Information about Solid State Drives (SSDs) for HyperDeck, including selection criteria.
Guidance on selecting SSDs that meet performance requirements for video recording.
Formatting SSDs using Mac OS X Disk Utility or Windows for HyperDeck compatibility.
Using HyperDeck Utility to change settings and update internal software.
Choosing recording and playback formats like ProRes and DNxHD using HyperDeck Utility.
Explanation of Ultra HD 4K resolution and its benefits for video production.
Configuring HyperDeck Studio Pro for Ultra HD 4K recording via SDI or HDMI.
Configuring HyperDeck Studio Pro for Ultra HD 4K playback output.
How to access recorded clips from the SSD on Mac OS X and Windows.
Understanding the LEDs and indicators on HyperDeck Shuttle and Studio models.
Using the Display menu on Studio models to change inputs, outputs, and settings.
Setting the timecode source to embedded metadata from HD-SDI video input.
Configuring HyperDeck for start/stop recording triggered by HD-SDI camera signals.
Setting up timecode run recording for cameras without HD-SDI trigger support.
Using shuttle and jog controls for navigating clips on HyperDeck Shuttle and Studio models.
Connecting a reference source for synchronizing HyperDeck with other video equipment.
Understanding RS-422 standard for remote control of HyperDeck Studio models.
Connecting and enabling remote deck control using an external RS-422 controller.
Simultaneously recording the same video signal to multiple HyperDeck Studios.
RS-422 commands for system control, device type, and basic operations.
RS-422 commands for preset, selection, and requesting status information.
RS-422 commands providing status and timecode data replies.
Details on RS-422 protocol, including bit definitions and serial communication syntax.
Using HyperDeck Studio Pro for high-speed video capture over Thunderbolt.
Dubbing recorded video from SSD to computer via Thunderbolt.
Capturing video via Thunderbolt while simultaneously recording to SSD.
Steps to set up and capture video from HyperDeck Studio Pro in Avid Media Composer.
Live video capture setup in Media Composer using Thunderbolt connection.
Configuring Final Cut Pro 7 for Blackmagic Easy Setups and capturing.
Setting up a new project and sequence in Premiere Pro CC for Blackmagic capture.
Capturing live video via Thunderbolt in Premiere Pro CC using the capture tool.
Grabbing still video frames from HyperDeck Studio Pro into Photoshop.
Capturing video and audio files using Media Express via Thunderbolt.
Steps to capture video and audio, set logging info, and manage audio channels.
Configuring Media Express for capturing DPX image sequences.
Importing and playing back video and audio files within Media Express.
Using Thumbnail and Timecode List views to browse, bin, and favorite clips.
Removing clips and bins, and finding clips using search and favorites.
Introduction to Blackmagic UltraScope for video signal quality control.
System requirements and connectivity for using UltraScope with HyperDeck Studio Pro.
Overview of Parade, Waveform, Vectorscope, Histogram, Audio, and Picture displays.
Switching between Full Screen and 2-up views and recommended resolutions.
Using the zoom function to analyze specific areas of displays in detail.
Using Parade Display to check illegal colors, levels, and color balance.
Using Waveform Display to adjust luma levels, composite views, and color correction.
Using Vectorscope Display for adjusting chroma levels and color balance.
Using Histogram Display to monitor black-to-white distribution and clipping.
Recording and reviewing video and audio errors for unattended operation.
Adjusting gamut, audio, and video error tolerance settings for custom profiles.
Monitoring embedded audio levels and phase using dBFS or VU meters.
Using the Picture Display for confidence monitoring and timecode verification.
Choosing the storage volume to be tested by Disk Speed Test.
Saving a screenshot of the disk speed test results.
Adjusting stress settings for quick demonstration of disk storage speed.
Accessing help documentation and version information for Disk Speed Test.
Details on the text-based protocol for controlling HyperDeck via TCP port 9993.
Reference for commands related to device info, slot info, clips, configuration, and notifications.
Understanding command combinations, XML usage, and basic/command syntax.
Understanding response codes for successful and failed commands.
Handling asynchronous responses, connection states, and remote control.
Managing connections, checking status, and accessing help commands.
Commands for switching between preview/output modes and controlling playback.
Commands for stopping operations and changing playback positions on the timeline.
Listing supported commands and controlling asynchronous notification settings.
Commands to get information about connected devices and storage slots.
Commands to list clips, their formats, durations, and count.
Commands to retrieve timeline data and current transport status.
List of supported video and file formats for HyperDeck Studio models.
Commands to query, update configuration, and select slots/video formats.
Commands for clearing timelines, adding clips, and configuring the watchdog timer.
Accessing manuals, software, and support notes online.
Methods for contacting Blackmagic Design support via email or phone.
How to find the installed version of HyperDeck Utility software.
Checking for and installing the latest HyperDeck software updates.
Important safety warning regarding the risk of electric shock from the unit.
Details of the 12-month limited warranty for the product.
To Next Page
