Using HyperDeck
10
Sandisk Extreme 480GB SSD
About SSDs
Choosing a Fast SSD
When working with high data rate video it's important to carefully check the SSD you would like to use.
This is because some SSDs can have up to 50% lower write speed than the manufacturer’s claimed speed,
so even though the disk specifications claim an SSD is fast enough to handle video, in reality the disk is
not fast enough for real time video recording. Hidden data compression mostly affects recording and
often these disks can still be used for real time playback.
In our testing, we have found larger newer models of SSD and larger capacity SSDs are generally faster.
SSDs recommended for use with HyperDeck for uncompressed 10 Bit HD and ProRes Ultra HD 4K video
recording include:
Crucial 512GB M4 (firmware 009 only)
Digistor – 128GB SSD Professional Video Extreme
Digistor – 240GB SSD Professional Video Series
Digistor – 480GB SSD Professional Video Series
Intel 335 Series 240GB SSD
Intel 520 Series 240GB SSD
Intel 520 Series 480GB SSD
Kingston 120GB SSDNow V+200
Kingston 240GB SSDNow V+200
Kingston HyperX 240GB
OCZ 240GB Deneva 2 (firmware 2.22)
OCZ 240GB Vertex 3
OCZ 480GB Vertex 3
OWC Mercury Extreme Pro 6G SSD
PNY 240GB Prevail SSD (firmware 5.0.2)
Sandisk Extreme 480GB
Please check the tech notes on the Blackmagic Design website for the latest information.
If you find an SSD that isn’t fast enough for uncompressed HD video or Ultra HD 4K, try a faster SSD or
use HyperDeck Utility to switch to a compressed recording format such as ProRes or DNxHD. These
recording formats have a much lower data rate and are easier for the SSD to handle.
Kingston HyperX 240GB SSD
Intel 335 Series 240GB SSD
Using HyperDeck