To Next PageTo Next PageWhat to do if my Black+Decker AIRSWIVEL BDASL100 won’t run?
If your Black+Decker Vacuum Cleaner won't run, there are a couple of things you can check: * First, make sure the vacuum is properly plugged into an electrical outlet. * Second, inspect the fuse or breaker. If the fuse is blown, replace it. If the breaker is tripped, reset it.
Why is my Black+Decker Vacuum Cleaner not picking up dirt?
If your Black+Decker Vacuum Cleaner isn’t picking up dirt, consider these possible causes: 1. The dust cup might be full, so empty it. 2. The filter may be dirty; remove any debris and clean it. 3. The hose might not be securely attached; check that it's snapped into place at both ends. 4. The dust cup might not be correctly in place; ensure it is fully inserted and the release handle is completely pushed in. 5. There could be a clog in the vacuum path; visually inspect the air passageway, hose inlet, and hose for obstructions, and carefully remove any blockages.
General| Brand | Black+Decker |
|---|---|
| Model | AIRSWIVEL BDASL100 Series |
| Category | Vacuum Cleaner |
| Language | English |
Defines safety symbols like DANGER, WARNING, CAUTION, and NOTICE used in the manual.
Emphasizes the importance of reading all instructions before operating the appliance.
Provides crucial warnings for safe operation, especially regarding children and supervision.
Lists critical "DO NOT" instructions for safe vacuuming, covering liquids, flammables, and toxic materials.
Details specific materials not to vacuum, like glass, nails, and coins, to prevent damage.
Advises against blocking openings or operating with blockages to maintain airflow.
Discusses safe handling of the power cord, plug, and polarized outlet requirements.
Warns against plugging in the vacuum until it is fully assembled and familiar with procedures.
Warns to turn off and unplug the vacuum before performing maintenance.
Warns about potential motor shutdown due to clogging and how to resolve it.
Instructions for cleaning the vacuum's exhaust filter.
Instructions for cleaning the dust cup's internal filter.
Repeats the safety warning to unplug before maintenance.
Lists critical prohibitions regarding filter installation and washing.
Instructions for cleaning debris from the vacuum's brush roll.
Safety warning to unplug before replacing the brush roll.
Prohibits the use of flammable liquids or solvents for cleaning.
States that accessories, tools, or components should not be washed in a dishwasher.
Safety warning to unplug before replacing the brush roll.
Safety warning to unplug before performing drive belt maintenance.
Warns to turn off and unplug the vacuum before troubleshooting.
Identifies possible causes and remedies for the vacuum not running.
Lists common causes and solutions for poor suction performance.
