Black+Decker BCBL700 - Troubleshooting; Register Online

ENGLISH
9

WARNING: To assure product
SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection
and replacement) should be performed by
a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacementparts.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
Register online at www.blackanddecker.com/register.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
Unit will notstart. • Battery not installedproperly. • Check battery installation.
• Battery notcharged. • Check battery chargingrequirements.
Battery won’t charge • Battery not inserted intocharger. • Insert battery into charger until green LED
appears. Charge up to 8 hours if battery
totallydrained.
• Charger not pluggedin. • Plug charger into a working outlet.
Refer to Important Charging Notes for
moredetails.
• Check current at receptacle by plugging in
a lamp or otherappliance.
• Check to see if receptacle is connected to
a light switch which turns power off when
you turn out the lights.
• Surrounding air temperature too
hot or toocold.
• Move charger and tool to a surrounding
air temperature of above 40°F (4.5°C) or
below 104°F (+40°C).
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.