10
ENGLISH
(Original instructions)
u Switch off and unplug the appliance/tool.
u Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u Or run the battery down completely if it is integral and then
switch off.
u Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u Regularly clean the ventilation slots in your tool/appliance
and charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u Regularly clean the cutting line and spool using a soft
brush or dry cloth.
u Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
BCSTE636 L1 H 1
Input Voltage
V
DC
36
No-Load Speed
min
-1
6500-8500/min
Weight
kg
3.2
Batteries Chargers (minutes)
Cat# Vdc Ah Weight Kg
Cat# 90590287* N517388* BDC1A BDC2A BDC2A36
Amps 400mA 1A 1A 2A 1.35A
BL1518 18 1.5 0.38 BL1518 225 90 90 45 X
BL1518ST 18 1.5 0.38 BL1518ST 225 90 90 45 X
BL2018 18 2.0 0.39 BL2018 300 120 120 60 X
BL2018ST 18 2.0 0.39 BL2018ST 300 120 120 60 X
BL2518 18 2.5 0.43 BL2518 380 150 150 75 X
BL4018 18 4.0 0.64 BL4018 600 240 240 120 X
BL5018 18 5.0 0.7 BL5018 750 300 300 135 X
BL20362 36 2.0 0.64 BL20362 X X X X 90
BL2536 36 2.5 0.68 BL2536 X X X X 110
BL1554 18/54 1.5 1.08 BL1554 225 90 90 45 X
BL2554 18/54 2.5 1.2 BL2554 380 150 150 75 X
Hand/arm weighted vibration value according to EN 50636:
= <2.5 m/s
2
, uncertainty (K) = 1.5 m/s
2
.
L
PA
(Emission sound pressure level) 79.5 dB(A)
uncertainty (K) = 1.1 dB(A)
L
WA
(Sound power level) 93.5 dB(A)
uncertainty (K) = 1.9 dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
BCSTE636 - Trimmer
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60335-1:2012+A11+A13;
EN 50636-2-91:2014
2000/14/EC, Lawn Trimmer, L ≤ 50 cm, ANNEX VI,
DEKRA Certication B.V. Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM, Netherlands
Notied Body ID No.: 0344
Level of accoustic power according to 2000/14/EC
(Article 12, Annex III, L ≤ 50 cm):
L
PA
(measured emission sound pressure level) 79.5 dB(A)
uncertainty (K) = 1.1 dB(A)
L
WA
(guaranteed sound power) 96 dB(A)
These products also comply with directive 2014/30/EU,
2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of Black & Decker.
Becky Cotsworth
Director – Outdoor Products Group
Black & Decker Europe. 270 Bath Road, Slough,
Berkshire, SL1 4DX, England
30/10/2019
Guarantee
Black & Decker is condent of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent.
To Next Page
Loading...
Need help?
General
