Black+Decker BEHTS401 User Manual

Troubleshooting
Problem Possible Cause Possible Solution
Slow running, noisy or
hot blades.
Dry, corroded blades.
Blades or blade support
bent.
Bent or damaged teeth.
Loose blade bolts.
Lubricate blades.
Straighten blade or
blade support.
Straighten teeth.
Tighten blade bolts.
Unit will not start. Lock off not fully
operated.
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is
tripped.
Cord or switch is
damaged.
Check that lock off is
fully forward prior to
moving main trigger.
Plug cord into a work-
ing outlet.
Replace circuit fuse.
(If the product repeat-
edly causes the circuit
fuse to blow, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Reset circuit breaker.
(If the product repeat-
edly causes the circuit
breaker to trip, discon-
tinue use immediately
and have it serviced
at a BLACK+DECKER
service center or
authorized servicer.)
Have cord or
switch replaced at
BLACK+DECKER
Service Center or
Authorized Servicer.
Technical data
BEHTS301
Type 1
BEHTS401
Type 1
BEHTS451
Type 1
Voltage V
AC
230 230 230
Power input W 500 500 550
Blade strokes
(no load)
min
-
1
1850 1835 1870
Blade length cm 50 55 60
Blade gap mm 22 22 25
Blade brake
time
s <1 <1 <1
Saw blade Max
cut
mm 35 35 35
Weight kg 2.47 2.54 2.65
BEHTS501
Type 1
Voltage V
AC
230
Power input W 600
Blade strokes
(no load)
min
-
1
1840
Blade length cm 60
Blade gap mm 25
Blade brake
time
s <1
Saw blade Max
cut
mm 35
Weight kg 2.65
Level of sound pressure according to EN 60745:
Sound pressure level at operator position (L
pA
) 89 dB(A), uncertainty (K) 3.5 dB(A)
Sound power level (L
WA
) 98 dB(A), uncertainty (K) 2.0 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
h, D
) 4.1 m/s
2
, uncertainty (K) 2.1 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
BEHTS301, BEHTS401, BEHTS451, BEHTS501 – Hedge
Trimmer
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1:2009 +A11:2010,
EN 60745-2-15:2009 +A1:2010
2000/14/EC, Hedge trimmer, Annex V
Measured sound power level (L
wA
) 98 dB(A)
Uncertainty (K) 2,0 dB(A)
Guaranteed sound power (L
wA
) 100 dB(A)
These products also comply with Directive
2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.

Black+Decker BEHTS401 Specifications

General

Brand	Black+Decker
Model	BEHTS401
Category	Trimmer
Language	English