Page 29
TROUBLESHOOTING & WARRANTY
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
The dishes are
not drying
Improper loading
Load the dishwasher as suggested in the
directions.
Too little rinse-aid
Increase the amount of rinse-aid/Refill the
rinse-aid dispenser.
Dishes are removed too soon.
Do not empty your dishwasher immediately
after washing. Open the door slightly so
that the steam can escape. Begin unloading
the dishwasher only once the dishes are
barely warm to the touch. Empty the low
basket first. This prevents water form
dropping o dishes in the upper basket.
A short wash program was
selected.
The short wash programs do not have
significant drying times to dry dishes
completely. Chose a longer wash program.
The cutlery or dishes are
made with materials such
as plastic not suitable for a
dishwasher.
Water drainage is more dicult with these
items. Cutlery or dishes of this type are not
suitable for washing in the dishwasher.
ERROR CODES
When some malfunctions occur, the appliance will display error codes. Provide the
error code when you call for service.
WARNING: If overflow occurs, turn o the main water supply before calling for
service. If there is water in the base pan because of an overfill or small
leak, the water should be removed before restarting the dishwasher.
CODES MEANINGS POSSIBLE CAUSE
E1 Longer inlet time.
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4 Overflow. Some element of dishwasher leaks.
To Next Page
Loading...
