Black+Decker HGS350 Series

Questions and Answers

S
steven87Jul 25, 2025
Why is my Black+Decker Kitchen Appliances steamer not producing steam?
- T
  Tony BurnsJul 25, 2025
  If your Black+Decker Kitchen Appliances steamer isn't producing enough steam, or no steam at all, first ensure it has preheated for at least 45 seconds, or until the power button light is a steady blue. Also, check the water tank and refill it to the Max level marker, following the instructions in the 'filling the water tank' section. Finally, after preheating, prime the water pump by holding the steam trigger until steam forms to ensure there is enough water in the boiler.
R
robert62Aug 2, 2025
What to do if my Black+Decker Kitchen Appliances steamer is leaking?
- R
  ryan86Aug 2, 2025
  If your Black+Decker Kitchen Appliances steamer is leaking or spitting, allow the steamer to heat for about 45 seconds. Also, ensure the water tank is filled to the Max level marker, following the instructions under the 'Filling the Water Tank' section.
C
Charles BryanAug 9, 2025
How to fix Black+Decker Kitchen Appliances steamer that is plugged in but not heating?
- M
  Mary DouglasAug 9, 2025
  If your Black+Decker Kitchen Appliances steamer is plugged in but not heating, first check that the plug is properly inserted into the outlet or try plugging the steamer into a different outlet. If that doesn't work, the auto shut-off may have activated. Press the steam trigger or press the power button to activate the steamer.
J
Jessica LeeAug 17, 2025
Why is my Black+Decker Kitchen Appliances steamer spitting out discolored water?
- T
  tsotoAug 17, 2025
  If discolored water is coming through the holes and staining the fabric when using your Black+Decker Kitchen Appliances steamer, it could be due to residue buildup in the water tank. Empty the water tank after each use and only use distilled, filtered, or purified water. Also, avoid using perfumed or scented additives and regularly clean the steamer.