Need help?Do you have a question about the Black+Decker PI750LA and is the answer not in the manual?
General| Peak Power | 1500 Watts |
|---|---|
| Input Voltage | 12V DC |
| Output Voltage | 120V AC |
| Waveform | Modified Sine Wave |
| Frequency | 60 Hz |
| Power Output | 750W |
| USB Output | 2.4A |
| Cooling | Fan |
| Protection | Overload, Short Circuit |
General power tool safety warnings and instructions for safe operation.
Defines safety terms like Danger, Warning, and Caution.
Instructions to reduce the risk of electric shock when using the inverter.
Instructions to reduce the risk of fire when using the inverter.
Precautions to reduce the risk of injury or property damage.
Guidance on reducing risks associated with improper operation or modification.
Instruction to retain the manual for future reference.
Connects the red end of the DC power cord.
Protects the inverter from overheating.
Connects the black end of the DC power cord.
Lights up when DC power input is present.
Lights up when the inverter shuts down due to voltage issues.
Turns the inverter on and provides AC power.
Allows plugging in 220V/120V AC products up to 750W.
Offers 5V power for USB equipment.
Ensures free air circulation around the unit during operation.
Connects the red clip to positive and black clip to negative battery terminals.
Do not allow water or liquids to contact the inverter.
Maintain surrounding air temperature between 32°F-104°F.
Keep the area surrounding the inverter clear for air circulation.
Do not use near flammable materials or fumes; it can spark.
Turning on the inverter illuminates the green LED and delivers AC power.
Plug AC products into outlets and switch them on one at a time.
Details on AC output voltage, power, frequency, and waveform.
Details on USB DC output voltage.
Input voltage, battery drain, shutdown points, fuse, and efficiency.
Ambient operating temperature range and weight.
Possible causes and solutions for no power or indicator lights.
Causes and solutions when the red LED indicator is on.
Reasons and fixes for the inverter handling small loads but not large ones.
What to do if water enters the unit.
Causes and solutions when the alarm is sounding.
Why output might be low and how to measure it correctly.
Reasons for short battery run time and possible solutions.
To Next Page
