Black+Decker VCBD8080 - Motor Inlet Sponge Filter Maintenance; Storage Instructions; Product Support and Help; Two-Year Limited Warranty Information

13
NEED HELP?
For service, repair or any questions regarding your appliance, call the appropriate 800 number on cover of this book.
Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer,
nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.
TWO-YEAR LIMITED WARRANTY
(Applies only in the United States and Canada)
What does it cover?
• Any defect in material or workmanship provided; however, liability will not exceed the purchase price of product.
For how long?
• Two years from the date of original purchase with proof of such purchase.
What will we do to help you?
• Provide you with a reasonably similar replacement product that is either new or factory refurbished.
How do you get service?
• Save your receipt as proof of date of sale.
• Visit the online service website at www.prodprotect.com/applica, or call toll-free 1-800-231-9786, for general
warranty service
• If you need parts or accessories, please call 1-800-738-0245.
What does your warranty not cover?
• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modied in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or
limitation of consequential or incidental damages, so this limitation may not apply to you.)
How does state law relate to this warranty?
• This warranty gives you specic legal rights. You may also have other rights that vary from state to state or
province to province.
MOTOR INLET SPONGE FILTER
The motor inlet sponge lter is located directly behind the dust collector, at the back of the canister.
38. Before cleaning lter, remove the dust collector located in the center of the unit.
39. The motor inlet sponge lter is located near the top of the unit.
40. Grasp the sponge lter and pull out.
41. Clean the sponge lter with soap and water, and allow to dry thoroughly before reinstalling.
42. Insert the sponge lter back into the canister or replace with a new lter and snap cover back in place.
STORAGE
Unit stores vertically for compact storage.