To Next PageTo Next Page
Need help?Do you have a question about the Blackstar HT-DUAL and is the answer not in the manual?
General| Brand | Blackstar |
|---|---|
| Model | HT-DUAL |
| Category | Music Pedal |
| Language | English |
Read the following information carefully. Save all instructions for future reference.
Thank you for purchasing this Blackstar valve effects pedal. Introduction to the design team and philosophy.
Offers high voltage valve distortion flexibility, Clean/Crunch modes, and ISF for tone shaping.
Adjusts overdrive/distortion for Channel 1 and Channel 2, offering a range from clean to lead tones.
Allows selection between clean or crunch modes for Channel 1.
Modifies low, middle, and treble frequencies for versatile tonal adjustments.
Shapes the overall tone signature, blending American and British tonal characteristics.
Sets the overall volume level for Channel 1 and Channel 2 respectively.
Connects the pedal's output to an amplifier input or other effects units.
Emulates speaker cabinet tone for direct connection to recording devices or mixing desks.
The primary input jack for connecting your guitar to the pedal.
Grille allows visibility of the ECC83 valve; user service is prohibited.
Specifies power requirements (22V DC) and maximum current draw (1.1A).
Lists all available controls and switches on the HT-DUAL pedal.
Details status LEDs, input/output jacks, and impedance specifications.
Provides the pedal's physical size (160x119x80 mm) and weight (1.2kg).
Recommended settings for an American-voiced clean tone on Channel 1.
Recommended settings for a British-voiced clean tone on Channel 1.
Recommended settings for a British-voiced crunch tone on Channel 1.
Recommended settings for a British-voiced high-gain tone on Channel 2.
Recommended settings for an American-voiced high-gain tone on Channel 2.
