Do you have a question about the Blackstar HT STAGE 60 212 MkII and is the answer not in the manual?
Power Output | 60 Watts |
---|---|
Effects Loop | Yes |
Reverb | Yes |
Footswitch | Included |
Type | Guitar Amplifier |
Technology Type | Valve |
Speaker Configuration | 2 x 12" |
Channels | 2 |
Valve Complement | 2 x EL34 |
Owner's manual for the Blackstar HT Stage MkII series of guitar amplifiers.
Read and follow all instructions for safe operation and maintenance.
Warnings to reduce the risk of fire or electric shock.
Caution regarding high internal voltages and user-serviceable parts.
Guidelines on cleaning, placement, and exposure to liquids or heat.
Advice on avoiding permanent hearing damage from high sound levels.
Thank you note and overview of the Blackstar design and development process.
Details on Clean and Overdrive channel voices and the ISF control.
Information on USB audio output and emulated outputs for recording.
Description of controls for the Clean channel including Volume, Voice, Bass, and Treble.
Controls for the OD 1 channel including Select, Gain, Volume, and Voice.
Controls for the OD 2 channel including Select, Gain, Volume, and Voice.
Details on EQ, ISF, Resonance, Presence, Volume, Power, and Standby controls.
Mains input, fuse specifications, and various speaker output impedance options.
Emulated outputs (XLR, Jack, USB) and Effects Loop send/return details.
Reverb voicing switch and sockets for footswitch control.
USB audio connection for recording and Kensington security slot.
Power, valves, weight, dimensions, and footswitch details for the 60W 1x12 model.
Power, valves, weight, dimensions, and footswitch details for the 60W 2x12 model.
Power, valves, weight, dimensions, and footswitch details for the 100W model.