To Next PageTo Next PageWhat to do if the Blade Kitchen Appliance keg light is blinking red?
If the keg light is blinking red, it means the keg locking switch is down while there is no keg in the appliance, or the keg is not properly detected. To fix this, flip the switch up and reload a keg. The light will blink for a few seconds and then turn green. If the light continues to blink, repeat these steps until you get a continuous green light.
Why is my Blade Kitchen Appliances temperature gauge showing the beer is cold, but the beer is warm after pouring a few glasses?
The keg has probably not been pre-cooled long enough. If you leave the keg for at least 24 hours in the Blade appliance, the entire keg will be cooled. If this doesn't solve the issue, have the appliance inspected by customer service.
What to do if the Blade Kitchen Appliances volume gauge says the keg is full, while many beers have been tapped from it?
The keg has probably been unlocked and locked again during use. This resets the volume counter to full. The problem will be resolved after loading a full keg.
General| Brand | Blade |
|---|---|
| Model | 9930 |
| Category | Kitchen Appliances |
| Language | English |
