What to do if the Blade Kitchen Appliance keg light is blinking red?
If the keg light is blinking red, it means the keg locking switch is down while there is no keg in the appliance, or the keg is not properly detected. To fix this, flip the switch up and reload a keg. The light will blink for a few seconds and then turn green. If the light continues to blink, repeat these steps until you get a continuous green light.
Why is my Blade Kitchen Appliances temperature gauge showing the beer is cold, but the beer is warm after pouring a few glasses?
The keg has probably not been pre-cooled long enough. If you leave the keg for at least 24 hours in the Blade appliance, the entire keg will be cooled. If this doesn't solve the issue, have the appliance inspected by customer service.
What to do if the Blade Kitchen Appliances volume gauge says the keg is full, while many beers have been tapped from it?
The keg has probably been unlocked and locked again during use. This resets the volume counter to full. The problem will be resolved after loading a full keg.
What to do if the Blade 9930 keg has been unlocked but cannot be removed?
There might be frost in the system. Relock the keg and unlock it again. The appliance has a heating element that will heat up the cooling element to defrost it. This takes several minutes. Please try to remove the keg after 15 minutes. If this doesn't work, switch it back on and try to unlock the keg again. If it is still unsuccessful, have the appliance inspected by customer service.
What to do if unlocking does not function on my Blade 9930?
Switch it back on and try to unlock the keg again. If this is unsuccessful, have the appliance inspected by customer service.
Why is the cooling fan still running on my Blade Kitchen Appliances after the keg has been unlocked?
The fan runs for an extra minute after the cooling is switched off.
Lists and describes the main parts and controls of the brewing system.
Details all components included in the product package for initial setup.
Warns about electrical shock hazards and provides critical safety precautions to avoid them.
Outlines essential safety rules for handling the appliance to prevent material damage and personal injury.
Provides advice on pre-cooling kegs and storing them for optimal beer quality and taste.
Explains the manual's purpose, content, and provides a link for downloading it.
States copyright protection and manufacturer's rights regarding the manual's content and illustrations.
Defines the meaning of different warning symbols used throughout the manual for hazard identification.
Specifies the appliance's exclusive purpose and intended commercial indoor use only.
Lists actions considered improper use, such as using non-genuine parts or defective kegs.
Outlines the manufacturer's liability limits concerning appliance use and maintenance.
Provides information on contacting customer service for assistance, complaints, and warranty claims.
Instructs users to pre-cool beer kegs in a refrigerator for 16-24 hours before installation.
Details necessary environmental conditions and placement for safe and trouble-free appliance operation.
Guides on proper electrical connection, voltage compatibility, grounding, and socket requirements.
Explains how to assemble the tap handle and attach it securely to the dispense tap mechanism.
Details the procedure for connecting the appliance's power cord to the mains socket.
Instructs on how to correctly attach the drip tray and its cover to the appliance base.
Guides on preparing the beer keg, including flipping the tap cover and unwinding the beer tube.
Details the process of inserting the keg, connecting the beer tube, and securing the inline dispensing valve.
Explains how to switch on the appliance, lock the keg, and perform initial operational checks.
Explains the function of the volume gauge and temperature gauge indicators on the appliance front.
Details the meaning of different LED signals for keg locking status and operational feedback.
Identifies and describes the functions of the main switch, keg locking switch, and dome lighting switch.
Provides steps and tips for achieving the best beer dispensing quality and foam head.
Outlines the procedure for safely removing an empty beer keg from the appliance.
Advises on how to manage partially full kegs to maintain correct pressure and cooling.
Describes the steps for removing a partially empty keg, with specific warnings about overpressure.
Explains how to properly switch off the appliance when no keg is installed and the system is unlocked.
Lists essential safety measures, like unplugging, before starting any cleaning procedures.
Details the steps for cleaning the appliance's outer surfaces, dome, and drip tray using mild agents.
Provides instructions for cleaning the inside bowl of the appliance with water and mild detergent.
Explains how to clean the condenser's ventilation openings using a vacuum cleaner.
Emphasizes safety precautions, especially regarding electrical hazards, before attempting any troubleshooting.
Guides on how to properly pack the appliance for shipping or warranty claims using original materials.
Lists common problems, their causes, and suggested solutions for troubleshooting the appliance.
Instructs on how to dispose of the appliance environmentally correctly according to EC directives.
Provides guidance on disposing of the product's packaging materials responsibly and retaining original packaging.
Lists the technical specifications, dimensions, and performance data of the beer dispensing system.
Outlines the terms, coverage, exclusions, and claim process for the product's warranty.
General| Brand | Blade |
|---|---|
| Model | 9930 |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
