Blade 9930 - Regular Cleaning Procedures; Cleaning the Inside Bowl; Cleaning the Condenser

Cleaning and maintenance
22
5.2 Regular cleaning
Clean the outer surfaces of the appliance with a soft damp cloth, the indicator
instruments can be cleaned e.g. with a lens cleaning cloth.
Remove the dome (I) and clean it with warm water and a mild washing-up
liquid. Wipe the inner side with a damp cloth.
Empty the drip tray (S) at regular intervals.
Clean the drip tray and the stainless steel drip tray cover (R) with warm water
and a mild washing-up liquid.
5.3 Cleaning the bowl
Inside bowl must be regular cleaned with a max 100 ml warm water and a mild
washing-up liquid. Wipe the inner side dry and check if the drain line is
unblocked.
5.4 Cleaning the condenser
Clean the ventilation openings with a vacuum cleaner (not battery-operated)
(Figure 45).
CAUTION
Do not use any scratching, abrasive or corrosive agents. Wipe the housing
with a soft damp cloth.
Do not use a water jet for cleaning.
Do not clean housing parts such as the dome or the drip tray in the dishwasher.
Otherwise, the high-gloss surfaces will gradually become dull and matt.
Observe the cleaning instructions.
►
►
►
►
■
■
■
■
■
■
45
4
NOTE
The ventilation openings of the condenser must be cleaned every 3 months
or when necessary.
►