Blade 9930 - Troubleshooting Guide; Safety Precautions for Troubleshooting; Proper Appliance Packing

Troubleshooting
23
6 Troubleshooting
This section contains important information on localising and eliminating faults.
Please observe the notes to prevent danger and damage.
6.1 Safety precautions
6.2 Proper packing of the appliance
In the event of a warranty claim, pack the Blade
®
countertop draught system appliance
into the original carton using the original packing material as shown at pictures on original
packingand proceed as follows:
Remove the tap handle and the tap handle shaft.
Empty the drip tray base (S). Clean the appliance and all parts.
Pack the appliance and the drip tray each into a plastic bag (Figure 46).
Finally seal the carton with adhesive tape (Figure 47)!
DANGER
Danger from electric current!
Danger to life in event of contact with live cables or components!
Pull the mains plug out of the socket before beginning with troubleshooting.
►
WARNING
Danger from unqualified repairs!
Observe the following safety precautions to avoid danger and material damage:
Do not open the appliance. Repairs to electrical appliances may only be
carried out by qualified electricians. Unqualified repairs can lead to conside-
rable danger for the user and cause serious damage to the appliance.
►
■
■
■
47
4
46
4
■
NOTE
Original carton packaging can be obtain from the local distributor.
►