Electrical connection of your hob
•
Before proceeding with the electrical connection, verify that the current
carrying capacity of the system and the socket is adequate for the maximum
power rating of the hob.
•
Electrical installation of the residence and the electrical current plug in
use must be earthed and conform to safety regulations.
•
lf there is no dedicated hob circuit and fused switch, they must be installed
by a qualified electrician before the hob is connected.
•
Fused switch must be easily accessible once the hob has been installed.
•
Do not use adaptors, multiple sockets and/or extension leads.
•
A means for disconnection with a suitable – isolating switch must be
incorporated in the fixed wiring in accordance with the wiring rules.
To Next Page
Loading...
