IMPORTANT: The following figure shows the connection details and minimum
diameters of supply cables that must be used for both single and three phase
connections:
•
The oven is to be connected to a 220-240Vac 50Hz supply. It is
earthed via the supply cord. The earthing cable must be connected via
the screw with the earthing mark.
•
During installation, please insure that isolated cables are used. An incorrect
connection might damage your appliance. The guarantee will not cover
such damages.
•
All repairs must be carried out by an authorised service personal or a
qualified electrician.
•
Unplug your appliance before each maintenance. For reconnection, follow
the connection diagrams strictly.
To Next Page
Loading...
