Turn Off individual Zone
A selective zone can be turned off with 3 different ways:
•
Simultaneous operation of and buttons
•
Reduction of the heat setting to ·o· by operating button
•
Use of timer turn off function for the corresponding heater
Simultaneous operation of and buttons
The corresponding zone must be chosen with the Active/Deactive Zone
Button, the Decimal Point of the related Zone Display flashes. To turn off
the zone, it must be pressed at the same time. A tone
signal sounds and ·o· appears in the heat setting display.
lf the timer is active for the selected heater, then 'O' will appear in the zone
display and also the related timer Cooking Zone lndicator Timer Function
and the Timer Display is turned off.
lf there is a residual heat for this zone, this will be indicated by a static
display 'H' in the zone setting display.
Reduction of the heat setting to ·o· by operating button
The zone can also be turned off by reducing the operated zone setting to '
O'.
When Zone Display indicates ·o·, an associated Decimal Point of the zone will also
be turned off.
Turning off an active zone, not only the ·o· appears in the Zone Display,
but also the related timer Cooking Zone lndicator and the Timer Display is
turned off.
lf there is a residual heat in this zone, this will be indicated by a static
display ' H' in the zone setting display.
To Next Page
Loading...
