Use of timer turn off function for corresponding zone (available only in
some models)
After reaching a remaining time of 0 minutes, the timer stops the linked
zone, showing the '0' shown in the Zone Display and shuts down the Timer
Display, with the Timer Display showing '00'. The related timer Cooking
Zone lndicator disappears.
An assigned Dual/Triple Zone Selection indicator also disappears if it is
active.
Additionally, a tone sound indicates the timer has ended. After
confirmation of the timer ending touching any button and the tone sound
will go silent.
Timer Function (available only in some models)
The timer provides following features:
The control can run max. 4 heater assigned timers and 1-minute minder
(which is assigned to no zone) simultaneously.
All timers can be used only in B-Mode. A zone timer can only be assigned
to an active zone, running in levels between 1-9. The minute minder is
independent of any zone.
in order to use both functions, timer function must be activated by the
Active/Deactive Timer button .
Touching once after activating the zones, the control proposes you to set
the minute minder (no Cooking Zone indicator is flashing, they are all on
or off).
Touching for second time, the control proposes the assignment to
one of the activated zones by flashing Cooking Zone indicator. Select
and the timer is linked to that zone.
Touching again, the next timer in the clockwise direction, is
proposed for selection for the next active zone. And so
on.
To Next Page
Loading...
