Minute Minder
No matter whether a zone is activated or not, the minute minder can be
operated by touching . The appearing '00' shows that timer is active and
the dot in the right Timer Display indicates that and are now linked
for setting the timer value.
The minute minder is selected when all Cooking Zone lndicators are statically
on or off (no Cooking Zone lndicator is flashing).
With
and , the timer value can be set.
After successful setting of the minute minder time, the timer starts to
decrement the time.
The minute minder will not be stopped by switching off the appliance or
activating the key lock function, it will proceed increasing the minutes until
run out indication.
After reaching the '00' of the timer, a tone indicates that the timer has
ended. To stop the tone, by touching any button.
Zone timer
Zone timers can be set only for activated Zone (Zone level must be set
between 1-9)
First touch of , the minute minder is activated. After touching for the
second time, the timer is assigned to the activated zone. The proposed
assignment is indicated Cooking Zone lndicator, which is flashing.
Touching again after activating the first zone timer, the control recommends
the next active zone assigned to the timer in the clockwise direction. The
assignment recommendation is indicated by the flashing Cooking Zone
indicator.
Touching and , the timer value for the zone can be set.
The running timer of the first set zone timer is indicated by the light indicator in
Cooking Zone indicator.
Touching once again further timers can be assigned to other activated
heaters.
To Next Page
Loading...
