Instructions for Use
(oven side)
The actual hour reappears and pilot lights (A) and (AUTO) remains on. Press key
(2) to control the remaining cooking time, or repeat the same procedure to chan-
ge the cooking time. Set the cooking time to 0.00 to erase the programming that has
been set up. Press key (4) to reset the manual function when the actual time reap-
pears. Once the cooking time is over, the acoustic signal set off and the oven is
automatically turned off. Press any one of the keys from (1) to (4) to turn off the
acoustic signal. Press key (4) to reset the programming device on the manual func-
tion.
Setting up the start and the end of cooking
For programming both the start and the cooking time, work as follows:
•Select the function and the required temperature using the function selector and
the thermostat.
•Press key (2), and set the required cooking time using keys (-) and (+) within 4
seconds.
•Press key (3) and set the end of the cooking time in the same way.
The actual hour reappears and the pilot light (AUTO) remains on. Also the pilot light
(A) will come on. Set to 0.00 the cooking time to erase the programming that was
set. Press key (4) to reset the manual function when the actual hour reappears.
Once the cooking time is over, the acoustic signal set off and the oven is automati-
cally put off. Press any one of the keys from (1) to (4) to cut off the acoustic signal.
Press key (4) to return the programming device in manual function.
Minute minder
When this device is used as a simple minute minder, press key (1) and programme
the required time by pressing keys (-) and (+) within the next 4 seconds: the actual
time re-
appears and the symbol (B) is activated. Press one of the keys from 1 to 4 to discon-
nect the acoustic signaller. Also symbol (B) is deactivated.
Manual Operation
The oven may be used manually without any programming. Press key (4) for the
manual operation (“AUTO” pilot light off).
20
To Next Page
Loading...
Need help?
General
