Cleaning the oven door
Unhooking the doors.
1. Set the oven's door wide open.
2. Lift the hinge jumpers by your thumb and index fingers, then turn them fully
outwards to the end of stroke (Fig.A).
3. Turn the door towards the closure position and lay it on the jumpers: in this
way the hinge's spring results as blocked. By fully closing the door the hin-
ges are unhooked from the connection slits which are integral with the oven's
muffle (sequence 1,2,3 of fig.B).
Hooking the doors
1. Insert the door by hooking the hinges to the connection slits set on the muffle
front.
2. Fully open the door when inserted, then push and turn the cross connections
which fasten the springs full scale in the oven direction.
3. Close the door and check its correct operation.
Replacing the oven bulb
Once the oven has been electrically disconnected, unscrew
the glass protection cap and the bulb, replacing it with another
one suitable for high temperatures (300°C / E14). Reassemble
the glass cap and reconnect the oven.
Maintenance and Cleaning
28
To Next Page
Loading...
Need help?
General
