Installing The Microwave
It is advisable to physically measure the actual product dimensions before cutting out
for installation.
Recommended Dimensions: Outside (exterior) 388H x 595W x 480Dmm
Cavity (interior) 230H x 340W x 350Dmm
Cut- out (proud mount) 380H x 560W x 550Dmm
To Build In This Unit To A Cabinet
The built-in cabinet shall not have a rear wall behind the
appliance.
Please measure the actual product before cutting out for
installation. The dimensions provided below are for proudmount cut
outs. Please note that the 2/3 mm may be required to be added on
to the below details.
Do not cover ventilation slots and air intake
points.
600
560
+8
min
550
380
+3
(80)
(80)
To Next Page
Loading...
