24 25
Assembly and features of the Blaser Ultimate BiPod
Guide the Blaser Ultimate BiPod over the spigot adapter and
operate the slide lock. After correctly placing the BiPod on the
spigot, let go of the slide lock and the BiPod is mounted.
Adjusting the windage
The BiPod can be rotated by up to +- 10° to the left and
right. You must open the lock screw for this purpose. Tolock
in position, close the lock screw using the clamping lever.
Tochange the range of movement of the lock screw, push up
the clamping lever to unlock it and then move to the desired
position.
To Next Page
Loading...