26 27
Adjusting the legs
The legs of the Blaser Ultimate BiPod can be adjusted using a
preset detent. Angles of 0°, 45°, 90°, 135 ° and 180° are possible.
To change this angle, each leg of the Blaser Ultimate BiPod must
be pushed down or pulled out to unlock. The leg can then be
rotated and moved to the desired position. When you let go
of the leg, a spring mechanism pulls the leg into the applicable
detent position and the angle changes. The preset detent
positions cover almost all the ranges needed for hunting and
target shooting.
To store the BiPod when carrying your rifle, it can be folded to
the 0° position under the barrel of the rifle, which makes it very
easy to carry.
Adjusting the height
The Blaser Ultimate BiPod has 18.5cm / 7.3"-long legs in normal
setup. Spring loading allows both legs to extend independently
in 1cm / 0,4" increments up to a maximum of 28.5 cm / 11.2",
atthe touch ofabutton.
To Next Page
Loading...