MACHINE MANUAL BRB-2800
MAINTENANCE
© 2010 Blastpro Manufacturing Inc.
®
19
SECTION 4.3: RECOMMENDED SPARE PARTS
It is recommended that the machine owner/operator keep a minimum of spare
parts with the machine while it is working. Down time due to part failure or lack
of wear parts can far exceed the cost of the parts.
PART NUMBER DESCRIPTION QUANTITY
BTP000451 6” CARPET REMOVAL BLADE Depends on size of job
BTP000553 8” CARPET REMOVAL BLADE Depends on size of job
BTP000554 10” CARPET REMOVAL BLADE Depends on size of job
BTP000555 12” CARPET REMOVAL BLADE Depends on size of job
BTP000853 6” TILE BLADE Depends on size of job
BTP000854 8” TILE BLADE Depends on size of job
BTP000855 12” TILE BLADE W/ BEVEL Depends on size of job
BTP000886 10” TILE BLADE W/ BEVEL Depends on size of job
SECTION 4.4: RECOMMENDED TOOLS
“Recommended Tools” is a list of the minimum tools necessary to maintain
and/or operate the BRB-2800 during normal operation. This list is not meant to
be exhaustive or to indicate the tools required for more intensive maintenance.
Ratchet
Sockets: 7/16”, 1/2”, 9/16” and 3/4”
Combination wrench: 7/16”, 1/2”, 9/16” and 3/4”
Utility knife
Rubber mallet or dead blow hammer
Leather gloves
To Next Page
Loading...